Circuit Breaker Switch Test Instrument

  • micro ohmmeter intelligent automatic contact resistance tester 200A

    micro ohmmeter intelligent automatic contact resistance tester 200A

    RDHL-200H contact resistance tester is designed for measuring loop resistance of Switching Control Equipment using High-frequency switching power supply technology and digital circuit technology. Test current of the Tester is DC-100A or DC-200A which is recommended in the national standards. The tester can measure the loop resistance at those values and display results in digital. It is high precision and good stability and can meet most power systems’ requirements in onsite high-voltage switches maintenance and high-voltage switches factory loop resistance measurement. (It’s performances accurately and stably)

    Email Details
  • digital micro ohmmeter contact loop resistance tester

    digital micro ohmmeter contact loop resistance tester

    The instrument panel is ergonomically designed, in line with operating practices, use high-frequency switching power supplies and digital circuit technology for measuring the contact resistance of the circuit switch control device. Test current is DC 100A. In the case of DC 100A can be directly measured contact resistance test result with a large-screen LCD display, and with data storage, print, time settings and other functions, and another gear 50A for user selection; custom test time, maximum 599S, much larger than the standard requirements of 60S; resolution 0.01μΩ and very stable. Meet the power; the electricity sector on-site high voltage switch maintenance and high-voltage switch factory contact resistance testing requirements.

    Email Details
  • Circuit Breaker Comprehensive Tester

    Circuit Breaker Comprehensive Tester

    With the development of society, people have higher and higher requirements for the safety and reliability of power consumption. High-voltage circuit breakers have the dual tasks of control and protection in the power system. The performance of the power circuit is directly related to the safe operation of the power system. The mechanical characteristic parameter is one of the important parameters for judging the performance of the circuit breaker.
    The Breaker Analyzer is a special instrument developed by the company to meet the needs of various high-voltage switch operating characteristics tests. The Circuit breaker dynamic tester can accurately measure mechanical dynamic characteristics parameters of low-oil, multi-oil, vacuum, SF6 and other high-voltage circuit breakers of various voltage levels

    Email Details
  • Disconnector Contact Pressure Tester HV disconnect testing device

    Disconnector Contact Pressure Tester HV disconnect testing device

    Disconnector is the most widely used high voltage switchgear in power system. The operation condition of disconnector is very bad, which is easy to cause mechanical or electrical failure. In particular, the contact part of the touch finger is vulnerable to rain, dust and harmful gases, resulting in poor contact and heating. The spring that provides the pressure of the touch finger will be annealed due to heating, which will reduce the pressure. This will lead to a vicious circle of the touch finger heating, and eventually burn the touch finger and cause an accident.
    In view of the current maintenance status of the power generation and supply system, our company has developed an intelligent tester for measuring the contact pressure of the high-voltage disconnector. As long as the sensor of the analog contact of the test clamp is opened at the contact position of each pair of contacts, the contact pressure of the contacts can be displayed and remembered. The HV disconnect testing device effectively solves a difficult problem of measuring finger pressure.

    Email Details
  • Vacuum Tester For Vacuum Switch

    Vacuum Tester For Vacuum Switch

    The common method to judge whether the vacuum degree of vacuum tube is deteriorated or not is power frequency withstand voltage method. This method can only judge the interrupter with serious vacuum degree deterioration. However, when the vacuum degrades to 10-2~10-1 PA, although the breakdown voltage does not decrease, the interrupter is not qualified.
    RDZK-208 vacuum switch vacuum tester adopts excitation coil and magnetic controlled discharge method to test the vacuum degree of arc extinguishing chamber without dismantling the arc extinguishing chamber. At the same time, the microcomputer is used for synchronous control and data acquisition and processing, so that the field test sensitivity of the vacuum degree of the interrupter reaches 10-5Pa. The outstanding feature of vacuum switch vacuum degree tester adopts excitation coil and data processing method to realize the measurement of vacuum degree without disassembly. Vacuum switch vacuum degree tester has the advantages of convenient use, simple operation, no disassembly, high measurement and test accuracy.
    Interrupter Vacuity Tester is a practical testing instrument, which is widely used in electric power, steel, petrochemical, textile, coal, railway and other departments using vacuum switch

    Email Details
Get the latest price? We'll respond as soon as possible(within 12 hours)

Privacy policy